(Image: Maximilien Brice/CERN)
Muons – heavy, weakly interacting particles – zip past the inner layers of the (CMS), after being produced in collisions by the (LHC). They are observed using special detectors placed on the periphery of the cylindrical device, where they are the particles most likely to register a signal. Although CMS, as the name suggests, was designed with the ability to observe with high precision nearly every muon produced within it, it will become more challenging to do so in a few years’ time. The (HL-LHC) will begin operations in 2026, providing on average over five times more simultaneous proton-proton collisions than before. Various components of CMS, including the muon system, are being upgraded during the ongoing (LS2) of CERN’s accelerator complex, in order to cope with the HL-LHC’s higher data rates.
Muon detectors contain different mixtures of gases that get ionised when high-energy muons fly through them, providing information about where the muon was at a given instant. The CMS muon system has so far used three different types of detectors: Drift Tubes (DT), Cathode Strip Chambers (CSC) and Resistive Plate Chambers (RPC). Around a decade ago, at about the time that CMS began collecting LHC collision data, it was decided to build a completely new type of detector called Gas Electron Multipliers, or GEM, to improve the muon-detection abilities of CMS in the HL-LHC era. After extensive R&D, the first GEMs were assembled and tested at CERN’s Prévessin site in a dedicated fabrication facility. In July, two of 72 so-called “superchambers” of GEMs were transported carefully to Point 5 and installed within CMS. Each superchamber had a bottle of gas strapped on top of it on the trolley so the detector could keep “breathing” the inert air. The remaining 70 superchambers will be installed later in LS2.
“ and Run 3 of the LHC will give us the opportunity to evaluate their performance,” says Archana Sharma, who has led the CMS-GEM team since 2009. “Of course,” she continues, “it’s not only there to be tested. The first GEMs will work with the existing CSCs to provide valuable triggering information to select the most interesting collision events.” Two more GEM stations with 288 and 216 modules respectively will be definitively installed in the coming years, in time for the HL-LHC.
The muon-system team have been busy upgrading the electronics of the 180 CSCs located closest to the beam line to prepare for the HL-LHC. “We have already removed, refurbished and reinstalled 54 CSCs this year,” notes Anna Colaleo, CMS muon-system manager. “Work on replacing the electronics for another batch of CSCs is in progress and we plan on completing this endeavour by the summer of 2020.”
CMS is also performing critical maintenance on the rest of the muon detectors during LS2. As expected, over the course of several years of operation, some components of these detectors have deteriorated slightly. The RPCs have been made more airtight to reduce gas leaks, while both DTs and RPCs have had some broken components replaced. In addition, neutron shielding is being added to the top of the DTs located in the central barrel to protect CMS from the neutron background caused by the particle beam interacting with the beam pipe.
With nearly a year and a half of LS2 left, the CMS experiment site at LHC Point 5 continues to be a hub of activity as the collaboration prepares for the LHC’s Run 3 and beyond.
More photos of the GEMs installation :
