By Kaleem Faisal*, Boon Edam Australia
You’ve done the research – revolving doors will save your company significantly on its energy bills, allow you to regain interior floor space, and help you stand out from the rest of the buildings on the block.
Your research also tells you that the door should last decades past the purchase date. And it will if you don’t overlook one critical item during installation: the flooring.
I have 15 years’ experience in the revolving door and engineering business, and I’ve seen, time and again, how neglecting the flooring can come back to bite – maybe not instantly – but definitely years down the road. Let’s explore why a level floor is necessary and when a floor frame might be required during installation.
A Level Floor is Critical
Installing a revolving door on top of a completely level floor is essential to a long product life. Think about it: a door rotating on an unlevelled floor will put undue stress on the door wings and the door operator. The wear and tear will be excessive, and your door will have to be replaced sooner than expected.
Shimming is a popular method for trying to square a door on an unlevelled floor. While this method is useful, if done in an excessive manner you’re setting your project up for failure over time. The shims will eventually force the door out of balance and plumb. The result? A door that is hard to push and is excessively loud, producing a rubbing and squeaking noise. Not ideal in an upscale lobby.
I often hear from contractors that there is absolutely no way to pour a dead level floor. If a tolerance is required, we recommend no greater than 1/8 inch (3.175 mm). Revolving door installers should check to ensure the floor meets these standards before they begin laying the framework for the door.
The Benefits of a Floor Frame (or Mat Well Ring)
Boon Edam revolving doors are designed to sit right on a level, finished floor. But, there are some cases where a floor frame (or sometimes called a “matwell ring”) is necessary for smooth door operation and/or aesthetic requirements.
What is a floor frame? A floor frame is circular in shape and constructed of tubular bar stock that is 2.54cm (1 inch) in diameter. The bar stock is rolled out to the circumference of the revolving door. The finished frame is then set into a recess in the flooring that is a little bit more than 2.54cm.
Once installed, the frame should be level to the flooring around it. If using concrete or terrazzo, the flooring is poured in and around the floor frame, and then the revolving door is placed on top of the frame extrusions. Or, if using tile, carpet, etc., the flooring is laid inside the frame, then the door is placed.
So why use a floor frame when you could install on top of the finished floor? There are four key reasons:
- You are installing an all-glass revolving door that does not have steel framing. Floor frames are necessary to achieve a seamless, all-glass look. The floor frame has U-channels that serve as receptors for the curved glass of the revolving door, giving the appearance that the glass is sitting right on top of the floor without any door framing.
- You are installing the door’s electrical drive in the floor. Maybe you want an all-glass door or a door with a short canopy. In these cases, the revolving door’s electrical components need to be installed in the floor rather than the overhead canopy. And to accomplish this, a floor frame becomes necessary.
- Your flooring of choice is a stainless steel floor grill or pedimat. Floor grills and pedimats are designed to trap leaves, dirt and moisture before a person gets to the nice, clean lobby floors. However, a revolving door cannot be installed directly on top of these flooring materials. This is where the floor frame comes in handy.
- You are using a different flooring inside the circular area of the revolving door than the flooring surround. This flooring method is not only aesthetically pleasing, but it also helps the user know where to step inside the door. A floor frame can be used to create a neat transition with tight tolerances between the two different flooring materials. No unsightly grout lines or other transition strips.
Terrazzo. Tile. Carpet. Grills. Pavers. Concrete. The flooring options are virtually endless. But, none of that matters to the success of a revolving door project if you make this most common mistake during the installation process: overlooking the importance of a dead-level floor and the benefits of a floor frame (or matwell ring).
*The Author, Kaleem Faisal, is Head of Engineering at Boon Edam Australia, which is part of the Royal Boon Edam Group. The Group provides architectural revolving door and layered security solutions to some of the world’s largest companies, including Fortune 500 companies, and companies in Australia, New Zealand, and Papua New Guinea. These include financial, data and telecommunications, Federal and State Government, hospitality, health and aged care, logistics, retail, and distribution facilities.
About us:
About Royal Boon Edam
With work environments becoming increasingly global and dynamic, smart, safe entry has become the centre of activity in and around many buildings. Royal Boon Edam is a global market leader in reliable entry solutions. Headquartered in the Netherlands, with 150 years of experience in engineering quality, we have gained extensive expertise in managing the transit of people through office buildings, airports, healthcare facilities, hotels, and many other types of buildings. We are focussed on providing an optimal, sustainable experience for our clients and their clients. By working together with you, our client, we help determine the exact requirements for the entry point in and around your building. Please take a look at our range of revolving doors, security doors & portals, speed gates, tripod turnstiles, access gates and full height turnstiles to ensure the security of your entry and perimeter. You can find more news about Boon Edam on www.boonedam.com.au/news
